OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0297

Vehicle Overspeed Condition

P0297 is a condition code: the engine module detects that road speed – from the vehicle speed sensor or wheel and output shaft speed – exceeded the calibrated maximum. Electronic speed limiters cut fuel or throttle at that limit, and the event is stored. Ford uses the code on its petrol trucks and stores it without the warning light; no manufacturer publishes a threshold. Common triggers are descending with a trailer beyond the limiter speed, wheelspin on the driven axle, a wrongly programmed tyre size or axle ratio, or spikes in the speed signal. Unlike P0219 it concerns road speed, not engine speed.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number2 / 97

Possible causes

  • Limiter speed genuinely exceeded (downhill, trailer) high
  • Wrong tyre size or axle ratio programmed, larger wheels fitted medium
  • Wheelspin on the driven axle medium
  • Speed signal disturbed (loose contact, interference, tone wheel) low

Symptoms

  • Usually no warning light, code only stored
  • Vehicle limits speed at its maximum
  • With a disturbed signal: jumping speedometer, odd shifting

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for P0297

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication