OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P028F

Charge Air Cooler Cooling Fan Control Circuit Driver Performance

Some vehicles – mainly commercial and off-road machines, or cars with a separate cooler for a coolant-cooled charge air cooler – have their own fan for the charge air cooler, switched by the engine module; a Deere patent describes such a fan that is also reversed to blow out dirt. P028F concerns the driver stage that switches the fan: it reports an internal fault such as overcurrent or overheating, or its diagnosis does not match the command. A shorted fan motor or wiring can overload the driver; otherwise the driver in the engine or fan module is faulty. No manufacturer document using this code was found; the description rests on CARB's output component requirement.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number2 / 8F

Possible causes

  • Fan motor or wiring shorted (driver overload) high
  • Driver in the engine or fan module faulty medium
  • Supply voltage or ground of the module poor low

Symptoms

  • Warning light (manufacturer-dependent)
  • Loss of power in heat or at low speed
  • High charge air temperature, possibly P026A

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P028F

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication