OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P028C

Charge Air Cooler Cooling Fan Stuck On

Some vehicles – mainly commercial and off-road machines, or cars with a separate cooler for a coolant-cooled charge air cooler – have their own fan for the charge air cooler, switched by the engine module; a Deere patent describes such a fan that is also reversed to blow out dirt. P028C means the fan runs although the module has switched it off – speed or current feedback, or the voltage at the output, does not match the off command. Typical causes are a welded relay contact or a shorted driver stage. The fan runs continuously and can drain the battery; the charge air tends to be too cold, which favours condensate. No manufacturer document using this code was found; the description rests on CARB's output component requirement.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number2 / 8C

Possible causes

  • Relay contact welded high
  • Driver stage or fan control module shorted medium
  • Control wire shorted (to ground on low-side, to voltage on high-side control) medium

Symptoms

  • Fan runs all the time, even after switch-off
  • Battery drains
  • Warning light (manufacturer-dependent)

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for P028C

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication