OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P027F

Cold Start Fuel Injection Quantity A Higher Than Expected

P027F is the cold-start counterpart of P026D: during cold start the engine gets more fuel than commanded, for example from a leaking injector or an EGR valve or throttle in the wrong position that reduces fresh air. The check probably works as in warm running, from airflow and lambda against the commanded quantity. The code covers only phases with the cold-start emission strategy active (extra injections to heat the catalyst, raised idle): CARB requires faults of elements also monitored elsewhere to be reported separately during the cold-start strategy. No manufacturer using this code was found; the description follows CARB and the warm-running counterpart.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number2 / 7F

Possible causes

  • Injector leaking or worn medium
  • EGR valve or intake/exhaust throttle in the wrong position (less fresh air) medium
  • Lambda/NOx sensor or airflow sensor reading wrong medium
  • Software low

Symptoms

  • Check engine light on
  • White or black smoke after a cold start
  • Rough running when cold

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P027F

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication