P027E
Cold Start Fuel Injection Quantity A Lower Than Expected
P027E is the cold-start counterpart of P026C: during cold start the engine gets less fuel than commanded, for example because a catalyst-heating injection does not arrive. The check probably works as in warm running, from airflow and lambda against the commanded quantity. The code covers only phases with the cold-start emission strategy active (extra injections to heat the catalyst, raised idle): CARB requires faults of elements also monitored elsewhere to be reported separately during the cold-start strategy. No manufacturer using this code was found; the description follows CARB and the warm-running counterpart.
Possible causes
- Injectors coked or clogged medium
- Rail pressure builds too slowly at cold start (filter, wax, pump) medium
- Airflow or lambda measurement inaccurate medium
- Software low
Symptoms
- Check engine light on
- Poor cold start, rough running when cold
- Longer warm-up
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P027E
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.