P027D
Fuel Pump Module B Control Circuit High
On demand-controlled fuel systems the engine module does not drive the pump itself but sends a pump control module the desired pump output on a separate control line, usually as a duty cycle; the module reports back on a monitor line or via CAN. Module B is a second pump module, for example on dual-tank commercial vehicles. P027D means the control circuit to pump module B reads high, typically a short to voltage – the counterpart of P025D. Ford lists it in the low-pressure lift pump monitor of its 2023 diesels, monitored continuously and set within 0.5 s, without its own threshold. Pump B may then run all the time or not at all.
Possible causes
- Control line to module B shorted to voltage high
- Moisture or corrosion in the connector medium
- Pump control module B faulty medium
Symptoms
- Check engine light on
- Pump B runs all the time or not at all
- Starting problems
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P027D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.