P027C
Fuel Pump Module B Control Circuit Low
On demand-controlled fuel systems the engine module does not drive the pump itself but sends a pump control module the desired pump output on a separate control line, usually as a duty cycle; the module reports back on a monitor line or via CAN. Module B is a second pump module, for example on dual-tank commercial vehicles. P027C means the control circuit to pump module B reads low, typically a short to ground – the counterpart of P025C. Ford lists it in the low-pressure lift pump monitor of its 2023 diesels, monitored continuously and set within 0.5 s, without stating its own threshold or which vehicle has a module B.
Possible causes
- Control line to module B shorted to ground high
- Connector at module B corroded or wet high
- Pump control module B faulty medium
- Ground point low
Symptoms
- Check engine light on
- Starting problems or stalling
- Loss of power from low supply pressure
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P027C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.