OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P026D

Fuel Injection Quantity A Higher Than Expected

From 2010, CARB requires diesel engines to detect when the commanded injection quantity is not delivered. The module estimates the fuel actually burned from airflow and the measured lambda (from the NOx or oxygen sensor) and corrects the quantity; if that correction passes a limit, the code sets. P026D means the engine gets more fuel than commanded. GM's LML diesel sets it at idle at a correction of +16 to +35 mm³ per stroke for 12 s, two trips. Volvo trucks detect it as too little oxygen at the NOx sensors for the fuel flow and point to boost sensor, EGR valve and sensor, wrong injectors, turbo vanes and intake leaks. On GM's 2.8 litre diesel vans of 2020–2022 it could also be a software anomaly without driving problems. Symptoms are black smoke and more frequent filter regeneration.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number2 / 6D

Possible causes

  • Injector dripping or worn, or wrong injector type fitted high
  • EGR valve not closing or EGR differential pressure sensor wrong medium
  • Boost sensor or turbo vanes faulty, intake leak medium
  • NOx or oxygen sensor reading wrong medium
  • Software low

Symptoms

  • Check engine light on
  • Black smoke, higher soot load, more frequent filter regeneration
  • Rough running or idle
  • Often nothing noticeable while driving

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P026D

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication