OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P026C

Fuel Injection Quantity A Lower Than Expected

From 2010, CARB requires diesel engines to detect when the commanded injection quantity is not delivered. The module estimates the fuel actually burned from airflow and the measured lambda (from the NOx or oxygen sensor) and corrects the quantity; if that correction passes a limit, the code sets. P026C means the engine gets less fuel than commanded. GM's 6.6 litre LML diesel checks it at idle with the vehicle stationary and the engine warm, setting it at a correction of −20 to −35 mm³ per stroke for 12 s; later GM diesels use the learned correction value (10 of 20 samples); both need two trips. FCA lists it with an injector cleaning procedure for deposits. Ford diesels do not use it. Typical causes are coked injectors, wrong airflow or lambda measurement and weak fuel supply.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number2 / 6C

Possible causes

  • Injectors coked or clogged (too little flow) high
  • Airflow or boost measurement wrong, NOx sensor lambda inaccurate medium
  • Weak low- or high-pressure supply (filter, pump, rail pressure) medium
  • Fuel quality or contamination low
  • Software low

Symptoms

  • Check engine light on
  • Lack of power
  • Rough running or idle

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P026C

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication