P026B
Injection Timing Performance
P026B is the engine-wide injection timing monitor: CARB requires diesels from 2010 to detect injection that is too early or too late overall, or a timing control at its limit. Unlike P020A ff (per cylinder) it concerns the engine as a whole. It is documented on the Ram 6.7 Cummins, together with the per-cylinder timing and balance codes; FCA describes it as set falsely by software and fixes it with an engine module update, without publishing thresholds. GM and Ford handle timing with per-cylinder codes instead (P01CB ff, P2B11 ff).
Possible causes
- Engine module software (false setting) high
- Injectors coked or worn (changed start of injection) medium
- Rail pressure or fuel supply problems (pump, filter, fuel quality) medium
- Crankshaft or camshaft signal inaccurate low
Symptoms
- Check engine light on
- Often nothing noticeable (false setting)
- Possibly knocking, rough running or more smoke
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P026B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.