OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P026A

Charge Air Cooler Efficiency Below Threshold

P026A means the charge air cooler is not cooling enough. The module compares the temperature drop across the cooler with the maximum possible (inlet minus ambient) or with a model: GM's 6.6 litre LML diesel sets it below 25 % efficiency, later GM diesels below 50 %, both after two trips; Ford's 6.7 and 3.0 diesels when the measured temperature is 18–35 °C (3.0: 35–65 °C) off the model over about 10 s. GM's 3.0 twin-turbo petrol with a coolant-cooled charge air cooler sets it in the first trip when manifold air exceeds 110 °C or boost has been limited for a long time. Hot intake air costs power and raises NOx and soot.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number2 / 6A

Possible causes

  • Charge air cooler clogged on the outside (insects, leaves, dirt) or fins damaged high
  • Coolant-cooled cooler: pump faulty, air in the low-temperature circuit, low coolant high
  • Charge air or ambient temperature sensor inaccurate medium
  • Charge air cooler bypass stuck open low
  • Software or calibration low

Symptoms

  • Check engine light on
  • Loss of power under load or in heat
  • High intake air temperature in live data

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P026A

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication