OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0264

Cylinder 2 Injector A Circuit Low

P0264 means the control wire of the cylinder 2 injector – the side the engine module switches to ground – is shorted to ground. GM detects this with the driver off: on direct injection at 1 V or less, on port injection and Duramax diesels at 0.5 Ω or less to ground. Ford's 6.7 diesel has its driver chip report the short within 0.3 s. Most systems switch the warning light on in the first trip (some GM port-injection engines and Saab's 2.0 turbo after two) and shut the affected injector off, so the cylinder misfires. Ford petrol engines report all injector circuit faults as P0201 ff instead.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number2 / 64

Possible causes

  • Control wire of the cylinder 2 injector chafed to ground in the harness high
  • Injector connector damp or corroded, leakage to ground medium
  • Injector shorted to its housing internally medium
  • Open control wire (on some GM port-injection drivers this also reads low; P020x sets too) low
  • Driver stage in the engine module faulty low

Symptoms

  • Check engine light on
  • Misfire and rough running, misfire code P0302
  • Loss of power, rough idle
  • Injector shut off, limp mode possible on diesels

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P0264

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication