P0257
Injection Pump Fuel Metering Control B Range/Performance (Cam/Rotor/Injector)
These codes cover the electrically controlled fuel metering actuator on a diesel injection pump – on common rail usually an inlet metering valve on the high-pressure pump that sets how much fuel is compressed. P0257 is the functional fault of actuator B: the metering does not achieve its target. It is documented on Mack and Volvo heavy-duty common-rail diesels of 2018–2020 together with rail pressure codes (P0087, P016F, P228F) and P2A17/P2A1F; the cause can lie outside the actuator, for example an electronic pressure relief valve stuck open, a leak or poor low-pressure supply, so those faults are fixed first. Engine power may be derated.
Possible causes
- Rail pressure or metering target not reached (leak, relief valve open) high
- Poor low-pressure supply (filter, lift pump, air) medium
- Metering actuator or pumping element worn medium
- Software or diagnostic level low
Symptoms
- Check engine light on
- Power derate
- Hard starting, low rail pressure when cranking
- Jerking under load
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P0257
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.