OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0256

Injection Pump Fuel Metering Control B (Cam/Rotor/Injector)

These codes cover the electrically controlled fuel metering actuator on a diesel injection pump – on common rail usually an inlet metering valve on the high-pressure pump that sets how much fuel is compressed. Actuator B is a second metering actuator, for example on pumps with two metering valves such as on Saab's 3.0 V6 diesel. P0256 is its general circuit fault, the counterpart of P0251. No manufacturer using P0256 was found – Saab reports its two valves under other codes; the description follows CARB's circuit monitoring requirement and the A siblings.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number2 / 56

Possible causes

  • Metering valve B open high
  • Connector or wire to valve B open high
  • Engine module low

Symptoms

  • Check engine light on
  • Loss of power, limp mode

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0256

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication