P0250
Turbocharger/Supercharger Wastegate Actuator B High
The wastegate lets exhaust bypass the turbine to limit boost; actuator B is either a pulse-width-modulated solenoid on a pneumatic wastegate can or an electric actuator with a position sensor. B is the second turbo or actuator, so B codes only exist on engines with two. P0250 means the control circuit of actuator B reads high: the control wire is shorted to voltage, checked with the driver on. GM's LGW twin-turbo sets it at less than 0.5 Ω to battery voltage in 10 of 20 samples with the warning light in the first trip; older GM modules need two trips. Ford reports it on pneumatic wastegates after 2–3 s. Valve B can no longer be controlled, so that side runs on base boost.
Possible causes
- Control wire of wastegate B shorted to voltage high
- Winding shorted internally (overcurrent) medium
- Connector corroded or damp medium
- Driver stage in the engine module faulty low
Symptoms
- Check engine light on
- Clearly less power, boost only at base level
- Uneven boost between the turbos
- Reduced engine power message possible
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0250
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.