OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P024B

Charge Air Cooler Bypass Control A Stuck

The charge air cooler bypass is a flap or valve that routes compressed air around the charge air cooler, so the engine and exhaust warm up faster after a cold start; when warm it closes or opens partly to control intake air temperature. It is driven by an electric motor with a built-in position sensor or by a solenoid and vacuum can. P024B means the bypass flap does not move at all despite being commanded – the position signal stands still or the air temperature shows no reaction. Bosch's patent describes exactly the case of a valve stuck closed or a blocked bypass, which raises emissions during warm-up. Stuck open, the charge air gets hotter and power drops; stuck closed, warm-up takes longer. No manufacturer document using this code was found – GM and Ford do not use the bypass codes; the description rests on CARB's component monitoring requirement and a Bosch patent on the bypass valve.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number2 / 4B

Possible causes

  • Flap seized or coked high
  • Actuator faulty (gear, motor) medium
  • Vacuum supply missing (pneumatic type) low
  • Position sensor reading constant low

Symptoms

  • Check engine light on
  • Stuck open: higher charge air temperature, loss of power
  • Stuck closed: longer warm-up

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P024B

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication