P024A
Charge Air Cooler Bypass Control A Range/Performance
The charge air cooler bypass is a flap or valve that routes compressed air around the charge air cooler, so the engine and exhaust warm up faster after a cold start; when warm it closes or opens partly to control intake air temperature. It is driven by an electric motor with a built-in position sensor or by a solenoid and vacuum can. P024A is the functional fault: the bypass does not follow its command, judged from the position sensor or from the expected temperature effect – Bosch describes comparing the cooler's efficiency with the valve closed and open, using modelled air temperature before and measured temperature after the cooler. FCA documents P024A, together with P026E, on the 2017 Alfa Romeo Giulia and 2018 Stelvio with the 2.0 turbo and fixed it with an engine software update, so check the software level first.
Possible causes
- Bypass flap sticking, coked or oily (oil from crankcase ventilation or turbo) high
- Actuator weak or vacuum line leaking medium
- Engine software (FCA 2.0 turbo) medium
- Position sensor inaccurate or connector corroded low
Symptoms
- Check engine light on
- Longer warm-up or higher charge air temperature
- Possibly less power from boost limitation
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P024A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.