OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0249

Turbocharger/Supercharger Wastegate Actuator B Low

The wastegate lets exhaust bypass the turbine to limit boost; actuator B is either a pulse-width-modulated solenoid on a pneumatic wastegate can or an electric actuator with a position sensor. B is the second turbo or actuator, so B codes only exist on engines with two. P0249 means the control circuit of actuator B reads low, typically the control wire shorted to ground. On GM's LGW twin-turbo less than 0.5 Ω to ground with the driver off in 10 of 20 samples sets it with the warning light in the first trip; older GM modules need two trips. Ford reports it on pneumatic wastegates after 2–3 s. Boost control is then switched off and only the spring-set base boost remains – less power, but no risk of overboost.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number2 / 49

Possible causes

  • Control wire of wastegate B chafed through to ground high
  • Valve or actuator winding B shorted medium
  • Connector damage or moisture medium
  • Driver stage in the engine module faulty low

Symptoms

  • Check engine light on
  • Clearly less power, boost only at base level
  • Uneven boost between the turbos
  • Reduced engine power message possible

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0249

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication