OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0247

Turbocharger/Supercharger Wastegate Actuator B

The wastegate lets exhaust bypass the turbine to limit boost; actuator B is either a pulse-width-modulated solenoid on a pneumatic wastegate can or an electric actuator with a position sensor. B is the second turbo or actuator, so B codes only exist on engines with two. P0247 is the general circuit fault of actuator B, the counterpart of P0243. On GM's 3.0 litre twin-turbo V6 (LGW) it means an open circuit of more than 200 kΩ with the driver off, 10 of 20 samples, warning light in the first trip. Ford uses it on twin-turbo V6 engines with electric wastegates as the collective code for open and short circuits (0.4 s), together with P2ABE. Boost control on that side is switched off, costing power.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number2 / 47

Possible causes

  • Connector at wastegate valve or actuator B loose or corroded high
  • Coil or motor winding of actuator B open medium
  • Broken control or supply wire medium
  • Driver stage in the engine module faulty low

Symptoms

  • Check engine light on
  • Clearly less power, boost only at base level
  • Uneven boost between the turbos
  • Reduced engine power message possible

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0247

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication