OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0243

Turbocharger/Supercharger Wastegate Actuator A

The wastegate lets exhaust bypass the turbine to limit boost; actuator A is either a pulse-width-modulated solenoid on a pneumatic wastegate can or an electric actuator with a position sensor. P0243 is the general circuit fault of actuator A. GM uses it for an open circuit: with the driver off, more than 200 kΩ between output and ground in 10 of 20 samples sets it with the warning light in the first trip (older modules: two trips). Ford uses P0243 on its electric wastegates as the collective code for open and short circuits (0.4 s), together with P2ABD for driver overcurrent or overheating. Boost control is then switched off and only the spring-set base boost remains – less power, but no risk of overboost.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number2 / 43

Possible causes

  • Connector at the wastegate valve or actuator loose, corroded or with spread contacts high
  • Valve coil or electric actuator winding open medium
  • Supply voltage to the valve missing (ignition, relay, fuse) medium
  • Broken control wire between module and valve medium
  • Driver stage in the engine module faulty low

Symptoms

  • Check engine light on
  • Clearly less power, boost only at base level
  • Sluggish acceleration, turbo lag
  • Reduced engine power message possible

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P0243

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication