P0242
Turbocharger/Supercharger Boost Sensor B Circuit High
Boost sensor B is a second boost pressure sensor, for a second turbo or bank on parallel twin-turbo engines or a second stage on two-stage systems. No manufacturer using sensor B codes was found – GM, Ford and Saab, even on two-stage and twin-turbo engines, use a single boost sensor; the description follows CARB and the documented sensor A codes. P0242 means the signal of sensor B is above its upper limit – for sensor A, GM uses 86 % of 5 V and Ford 4.88 V for 5 s. Causes are a short to voltage, an open ground or, on a pulled-up input, an open signal wire.
Possible causes
- Sensor ground open, or signal wire open on a pulled-up input high
- Signal shorted to 5 V or 12 V medium
- Sensor faulty internally medium
- Engine module low
Symptoms
- Check engine light on
- Loss of power, limp mode
- Boost B shows its maximum value
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P0242
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.