P023E
Manifold Absolute Pressure - Turbocharger/Supercharger Boost Sensor B Correlation
Boost sensor B is a second boost pressure sensor, for a second turbo or bank on parallel twin-turbo engines or a second stage on two-stage systems. No manufacturer using sensor B codes was found – GM, Ford and Saab, even on two-stage and twin-turbo engines, use a single boost sensor; the description follows CARB and the documented sensor A codes. P023E is the counterpart of P023D: manifold pressure is compared with boost sensor B, and with the engine stopped both must read ambient pressure. Saab sets the sensor A version at a difference of more than 12 kPa; a deviation beyond the manufacturer's limit sets this code.
Possible causes
- Boost sensor B or manifold sensor drifting high
- Contact resistance at sensor B's connector or wire medium
- Pressure port blocked low
Symptoms
- Check engine light on
- Possibly limited power
- Otherwise unremarkable
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P023E
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.