OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0239

Turbocharger/Supercharger Boost Sensor B Circuit

Boost sensor B is a second boost pressure sensor, for a second turbo or bank on parallel twin-turbo engines or a second stage on two-stage systems. No manufacturer using sensor B codes was found – GM, Ford and Saab, even on two-stage and twin-turbo engines, use a single boost sensor; the description follows CARB and the documented sensor A codes. P0239 is the general circuit fault of sensor B, the counterpart of P0235, without telling low, high or range apart. As with sensor A, boost control would be switched off, with loss of power.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number2 / 39

Possible causes

  • Connector or wire to sensor B open or corroded high
  • Sensor B faulty or oily medium
  • Shared 5 V reference or ground disturbed low
  • Engine module low

Symptoms

  • Check engine light on
  • Loss of power, limp mode
  • Uneven boost build-up on twin turbos

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for P0239

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication