OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0237

Turbocharger/Supercharger Boost Sensor A Circuit Low

Boost sensor A measures the absolute pressure between charge air cooler and throttle – GM calls it TIAP, Ford TIP – usually combined with an intake air temperature sensor; its voltage rises with pressure. With the ignition on and the engine stopped it must read the same as manifold and barometric pressure. P0237 means the signal voltage is below its lower limit: GM below 14.4 % of 5 V (about 50 kPa) for roughly 4 s with the warning light in the first trip, Ford below 0.19 V for 5 s, Saab's V6 below 0.30 V for 1 s. Causes are a signal wire shorted to ground, an open 5 V reference or a failed sensor. Saab's 1.6 turbo only lights a service lamp for this code. With a sensor fault boost control is switched off and only the base boost of the wastegate spring remains, with a clear loss of power.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number2 / 37

Possible causes

  • Signal or 5 V reference wire open or shorted to ground high
  • Connector unplugged or corroded high
  • Sensor faulty internally medium
  • 5 V reference pulled down by another sensor low
  • Engine module low

Symptoms

  • Check engine light on
  • Clear loss of power, only base boost
  • Boost reading implausible in a scan tool

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for P0237

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication