P022B
Charge Air Cooler Bypass Control A Circuit Low
The charge air cooler bypass is a flap or valve that routes compressed air around the charge air cooler, so the engine and exhaust warm up faster after a cold start; when warm it closes or opens partly to control intake air temperature. It is driven by an electric motor with a built-in position sensor or by a solenoid and vacuum can. P022B means the drive circuit reads low – typically the control wire shorted to ground. The module then switches bypass control off and the flap stays in its rest position. No manufacturer document using this code was found – GM and Ford do not use the bypass codes; the description rests on CARB's component monitoring requirement and a Bosch patent on the bypass valve.
Possible causes
- Control wire shorted to ground (chafing) high
- Actuator winding shorted medium
- Moisture or corrosion in the connector medium
- Driver stage in the engine module faulty low
Symptoms
- Check engine light on
- Depending on the rest position: longer warm-up or higher charge air temperature with slight loss of power
- Often nothing noticeable while driving
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P022B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.