P0229
Throttle/Pedal Position Sensor/Switch C Circuit Intermittent
Sensor C is a third throttle or pedal position signal; its role depends on the manufacturer. Ford uses it for the sensor of the second throttle body on engines with two throttles and digital (SENT) sensors, GM does not use it. P0229 reports a fault of sensor C that comes and goes. Ford documents it exactly: if its digital sensor on the second throttle body reports a fault for more than 0.4 s, P0229 sets; if the fault persists beyond 4 s it becomes P0225. Both switch on the warning light and the wrench light. Typical causes are a loose contact at the second throttle body's connector or chafed wiring.
Possible causes
- Loose contact at the second throttle body connector (spread pins, corrosion) high
- Harness chafing with intermittent short or open medium
- Sensor or second throttle body with an internal intermittent fault medium
- Voltage dips in the supply or ground low
Symptoms
- Check engine light and wrench light (Ford)
- Brief jerking or loss of power
- Occasional limp mode
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P0229
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.