P0223
Throttle/Pedal Position Sensor/Switch B Circuit High
With electronic throttle control the throttle body carries two position sensors, A and B, usually with opposite or offset signals, and the engine module compares them (correlation code P2135). GM and Ford give the pedal sensors their own codes (P2120 ff), so B is in practice the second throttle sensor. P0223 means the signal of sensor B is above its upper limit – GM above 4.59 V, Ford above 4.75 V – typically an open sensor ground, a signal shorted to 5 V or battery voltage, or an open signal wire on a pulled-up input. Both detect it within about a second and switch the warning light on in the first trip. The module carries on with sensor A, limits throttle opening and power and switches off cruise control.
Possible causes
- Sensor ground open high
- Sensor B or throttle body faulty high
- Signal shorted to 5 V or 12 V in the harness medium
- Engine module faulty low
Symptoms
- Check engine light and throttle warning light
- Reduced power, limp mode
- Poor throttle response, jerking
- Cruise control disabled
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P0223
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.