P0222
Throttle/Pedal Position Sensor/Switch B Circuit Low
With electronic throttle control the throttle body carries two position sensors, A and B, usually with opposite or offset signals, and the engine module compares them (correlation code P2135). GM and Ford give the pedal sensors their own codes (P2120 ff), so B is in practice the second throttle sensor. P0222 means the signal of sensor B is below its lower limit – GM about 0.25 V, Ford below 0.25 V – typically a short to ground, an open signal wire or a missing 5 V reference. Both detect it within about a second and switch the warning light on in the first trip. If the shared reference fails, several sensors report low at once. The module carries on with sensor A, limits throttle opening and power and switches off cruise control.
Possible causes
- Signal or 5 V wire open or shorted to ground high
- Throttle body or sensor B faulty internally high
- 5 V reference pulled down by another sensor medium
- Connector corrosion or water ingress medium
- Engine module faulty low
Symptoms
- Check engine light and throttle warning light
- Reduced power, limp mode
- Poor throttle response, jerking
- Cruise control disabled
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P0222
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.