OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0219

Engine Overspeed Condition

P0219 is a condition code: engine speed has exceeded the overspeed limit even though the rev limiter already cuts fuel – so the engine was driven from outside, usually by downshifting at too high a road speed or descending in too low a gear, or the speed signal was wrong. Limits: Ford 6.7 litre diesel above 4,200 rpm, 3.0 litre above 4,800 rpm, after 0.1 s; GM/Saab 2.8 V6 petrol with manual gearbox above 7,000 rpm for 1 s; Saab 2.2 diesel above 6,200 rpm, although fuel is cut from 5,000 rpm. Many manufacturers store it without the warning light. Saab advises: together with a camshaft sensor code it was real overspeed, alone check the speed signal; after real overspeed inspect the engine for valve train damage.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number2 / 19

Possible causes

  • Downshift at too high a road speed (manual gearbox) high
  • Descending in too low a gear medium
  • Fault in the speed signal (crankshaft sensor, wiring) low
  • Diesel runaway (oil drawn into the intake) or sticking injection low

Symptoms

  • Usually no lasting symptoms, only a stored code
  • Briefly very high revs, limiter intervening
  • Check engine light possible (manufacturer-dependent)
  • After real overspeed: rattling, loss of power

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for P0219

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication