P0200
Injector Circuit/Open
P0200 is the injector circuit fault without a cylinder assignment. The large US manufacturers do not use it – GM and Ford report injector faults per cylinder (P0201 ff) or as faults of the shared injector supply (P062D/P062E, P2146 ff). Saab documents it on the 3.0 V6 diesel of the 9-5, whose injectors are driven by a separate power stage behind the glovebox: there P0200 means an electrical fault in that power stage or its wiring, and the engine is shut down. Generally the cause lies in something all injectors share – supply, fuse, relay, ground or driver stage – so several cylinders are affected at once. CARB does not require separate codes for each kind of circuit fault.
Possible causes
- Shared injector supply open (fuse, relay, harness connector) high
- Separate injector power stage or its wiring faulty (diesel) medium
- Driver stage in the engine module faulty low
- Ground fault of the module or power stage low
Symptoms
- Check engine light on
- Engine does not start or shuts down
- Severe misfire on several cylinders
- Limp mode, loss of power
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P0200
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.