P01FF
Turbocharger Outlet Pressure Sensor A/B Correlation
Turbocharger outlet pressure sensor B is a second pressure sensor at a compressor outlet – for example one per turbo on twin-turbo engines or a second measuring point; sensor A has the codes P00F8–P00FC. It is a separate family from the boost pressure sensor: GM and Ford report the pressure ahead of the throttle under the boost sensor codes P0236–P0238. No manufacturer using the sensor B codes was found; FCA documents sensor A and a second outlet sensor. P01FF compares sensors A and B: with the engine off both should read barometric pressure, and in comparable operation they must agree within a tolerance. If they disagree without either being electrically faulty, this code sets; which one is wrong is found by comparing with barometric and manifold pressure. On twin-turbo engines a genuinely weaker turbo on one bank can also cause it.
Possible causes
- One sensor drifting high
- Leak or hose damage between the measuring points or on one bank medium
- Contact resistance at one sensor's connector or ground medium
- Uneven turbo output (twin-turbo, wastegate or vanes on one side) low
Symptoms
- Check engine light on
- Loss of power, boost limited
- Limp mode possible
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P01FF
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.