P01FE
Turbocharger Outlet Pressure Sensor B Intermittent/Erratic
Turbocharger outlet pressure sensor B is a second pressure sensor at a compressor outlet – for example one per turbo on twin-turbo engines or a second measuring point; sensor A has the codes P00F8–P00FC. It is a separate family from the boost pressure sensor: GM and Ford report the pressure ahead of the throttle under the boost sensor codes P0236–P0238. No manufacturer using the sensor B codes was found; FCA documents sensor A and a second outlet sensor. P01FE counts brief spikes or dropouts that are too short for the low or high code. Ford's equivalent boost sensor check sets after 10 such events in one drive cycle. The usual cause is a loose or corroded contact or a wire broken by vibration and heat.
Possible causes
- Loose contact or corroded connector high
- Wire breaking from vibration or heat medium
- Sensor erratic internally low
Symptoms
- Check engine light on (often intermittent)
- Occasional power dips
- Jerking under boost
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P01FE
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.