P01FB
Turbocharger Outlet Pressure Sensor B Range/Performance
Turbocharger outlet pressure sensor B is a second pressure sensor at a compressor outlet – for example one per turbo on twin-turbo engines or a second measuring point; sensor A has the codes P00F8–P00FC. It is a separate family from the boost pressure sensor: GM and Ford report the pressure ahead of the throttle under the boost sensor codes P0236–P0238. No manufacturer using the sensor B codes was found; FCA documents sensor A and a second outlet sensor. P01FB is the plausibility fault: the signal is electrically valid but does not fit. After a long stop all pressures should equal barometric pressure; while running the value is compared with a pressure modelled from airflow, speed and throttle – GM flags its boost sensor at deviations of roughly 25–30 kPa.
Possible causes
- Sensor drifting or stuck high
- Leaking charge air hose or blocked pressure port medium
- Contact resistance at the connector medium
- Fault in other model inputs (MAF, MAP) low
Symptoms
- Check engine light on
- Loss of power, boost limited
- Limp mode possible
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P01FB
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.