P01FA
Turbocharger Outlet Pressure Sensor B Circuit
Turbocharger outlet pressure sensor B is a second pressure sensor at a compressor outlet – for example one per turbo on twin-turbo engines or a second measuring point; sensor A has the codes P00F8–P00FC. It is a separate family from the boost pressure sensor: GM and Ford report the pressure ahead of the throttle under the boost sensor codes P0236–P0238. No manufacturer using the sensor B codes was found; FCA documents sensor A and a second outlet sensor. P01FA is the general electrical fault that the module does not classify as low or high. Without a plausible actual pressure, boost control usually limits boost.
Possible causes
- Connector or pins at sensor B loose or corroded high
- Harness damaged (5 V reference, signal, ground) medium
- Sensor faulty medium
- Engine module or 5 V supply disturbed low
Symptoms
- Check engine light on
- Loss of power, boost limited
- Limp mode possible
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P01FA
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.