OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P01E3

Engine Coolant Temperature Sensor 3 Circuit

Coolant temperature sensor 3 is a third NTC coolant sensor on engines with thermal management or split cooling circuits; its position is defined by the manufacturer – on Jaguar Land Rover's 2018–2019 Ingenium petrol engines it sits in the engine block water jacket, on Audi's 3.0 TFSI V6 it is part of the thermal management. As with every NTC sensor, a low signal voltage means hot and a high one cold. CARB requires such additional sensors to be monitored from model year 2019 onwards. P01E3 is the general circuit fault of this sensor without telling low from high. No manufacturer document using exactly this code was found; it is described by analogy with its documented sibling codes and the NTC principle.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number1 / E3

Possible causes

  • Open circuit or loose contact at connector or wiring of sensor 3 high
  • Sensor open or shorted high
  • Short to ground or voltage in the harness medium
  • Control module low

Symptoms

  • Check engine light on
  • Coolant temperature or cooling fan behaviour possibly affected
  • Often no change in driving

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P01E3

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication