P01C3
Fuel Pressure Sensor A Circuit
Fuel pressure sensor A is a fuel pressure sensor without 'rail' in its name and without a bank – unlike the rail pressure sensors P0190–P0194 and P01BE–P01C2; which sensor it is depends on the manufacturer. The only documented case is FCA, where sensor A is the low-pressure sensor in the supply line, read together with the fuel pump control module. GM calls its low-pressure sensor 'sensor B' (P018A–P018E). P01C3 is its general circuit fault without telling low from high. No manufacturer document using exactly this code was found; the description rests on CARB's circuit monitoring requirement, the FCA sibling code P01C6 and GM's equivalent low-pressure sensor checks.
Possible causes
- Connector corroded or wet, wire open or shorted high
- Sensor faulty medium
- 5 V reference or ground disturbed medium
- Fuel pump control module or engine module low
Symptoms
- Check engine light on
- Hard starting or stalling possible
- Hesitation or lack of power under load
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P01C3
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.