P01BD
Engine Oil Temperature Sensor B Circuit Intermittent/Erratic
The engine oil temperature sensor B is an NTC thermistor fed with 5 V through a resistor: the hotter the oil, the lower the signal voltage. The engine module uses the oil temperature for variable cam timing (Ford disables it with cold oil or a sensor fault), engine protection and the oil life monitor; many engines have no such sensor and use a calculated oil temperature instead. Sensor B is a second oil temperature sensor whose position is defined by the manufacturer. P01BD covers brief or erratic signal faults of sensor B, the counterpart of P0199 – typically a loose contact or a harness chafing as the engine moves. No manufacturer document using the B-sensor codes was found, so it is unclear who fits a sensor B; the description follows sensor A and CARB's circuit monitoring requirement.
Possible causes
- Loose contact or corrosion at the sensor B connector high
- Harness chafing intermittently medium
- Sensor B with internal hairline crack medium
Symptoms
- Check engine light or only a stored code
- Jumping oil temperature values
- Usually no driving symptoms
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P01BD
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.