P0199
Engine Oil Temperature Sensor A Circuit Intermittent/Erratic
The engine oil temperature sensor A is an NTC thermistor fed with 5 V through a resistor: the hotter the oil, the lower the signal voltage. The engine module uses the oil temperature for variable cam timing (Ford disables it with cold oil or a sensor fault), engine protection and the oil life monitor; many engines have no such sensor and use a calculated oil temperature instead. P0199 covers brief or erratic signal faults: the value jumps faster than oil temperature can physically change, or a circuit fault appears only momentarily – typically a loose contact. No manufacturer document with thresholds for P0199 was found; GM and Ford catch short faults with counting windows under P0197/P0198. The description rests on CARB's circuit monitoring requirement and component information.
Possible causes
- Loose contact or corroded pins at the sensor connector high
- Harness chafing intermittently (engine movement) medium
- Sensor with internal hairline crack medium
- Control module ground connection low
Symptoms
- Check engine light or only a stored code
- Oil temperature reading jumps
- Occasionally restricted cam timing
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P0199
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.