OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0187

Fuel Temperature Sensor B Circuit Low

Fuel temperature sensor B is an NTC thermistor: the hotter the fuel, the lower its resistance and signal voltage. On diesels it sits in the injection pump, rail or return line; on Ford petrol direct-injection engines it is built into the rail pressure sensor, and GM uses digital rail temperature sensors on its direct-injection engines. Sensor B is the second measuring point, for example GM's 6.6 litre diesel sensor 2 or a second rail. P0187 means the signal of sensor B is below its valid range – with an analogue NTC a short to ground or very hot reading. GM's 6.6 litre diesel sets it below 0.60 V (above about 150 °C) for 5 s; GM's direct-injection petrol engines use a digital rail temperature sensor 2 and set it below a count of 145 in 50 of 62 samples, two trips – communication faults of these digital sensors have codes of their own.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number1 / 87

Possible causes

  • Signal wire shorted to ground (chafing) high
  • Sensor shorted internally high
  • Moisture or corrosion in the connector medium
  • Engine control module low

Symptoms

  • Check engine light on
  • Implausibly high fuel temperature in scan data
  • Possibly starting problems

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0187

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication