P0182
Fuel Temperature Sensor A Circuit Low
Fuel temperature sensor A is an NTC thermistor: the hotter the fuel, the lower its resistance and signal voltage. On diesels it sits in the injection pump, rail or return line; on Ford petrol direct-injection engines it is built into the rail pressure sensor, and GM uses digital rail temperature sensors on its direct-injection engines. P0182 means the signal is below its valid range – with an NTC that points to a short to ground or an internally shorted sensor, and the control module would read about 150 °C. Limits: Ford diesel below 0.095 V, Ford petrol below 0.12 V for 5 s, GM diesel below 50 Ω (two trips), GM 6.6 litre below 0.60 V for 5 s, Saab EDC16 below 0.23 V for 0.6 s with a substitute value of 50 °C. Genuinely hot fuel within the valid range is P0168 instead.
Possible causes
- Signal wire shorted to ground (chafing) high
- Sensor shorted internally high
- Moisture or corrosion in the connector medium
- Engine control module low
Symptoms
- Check engine light on
- Fuel temperature in scan data implausibly high (about 150 °C)
- Possibly cold-start problems
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0182
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.
Sources
- law.cornell.edu/regulations/california/13-CCR-1968.2
- fordservicecontent.com/Ford_Content/catalog/motorcraft/obd-summary-diesel-2023.pdf
- fordservicecontent.com/Ford_Content/catalog/motorcraft/OBD-Operations-Summary-Gasoline-2020-2023.pdf
- gsi.ext.gm.com/gmspo/mode6/pdf/2018/18OBDG04 Engine Diagnostics.pdf
- gsi.ext.gm.com/gmspo/mode6/pdf/2014/14OBDG10 Engine Diagnostics.pdf
- saabwisonline.com/9-5-9600/2010/2-engine/engine-management-system-edc-16/fault-diagnosis-diagnostic-trouble-codes/p0182