OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P017F

EVAP System Leak Detection Pump Module Air Filter Restricted

Leak detection pump modules in the evaporative emission system (for example Bosch's DM-TL, used by VW, BMW, Porsche, Volvo, Mini, Land Rover and Kia/Hyundai) draw fresh air through their own filter, often mounted separately via a hose; at rest the charcoal canister is also vented through it. P017F means this filter is restricted – by dust, mud or water when fitted near a wheel arch. The reference measurement of the pump and the venting are then distorted, and the tank can pull a vacuum. A GM patent describes detection via the pressure difference across the filter during purge (above about 8 inH2O for 10–20 s). No manufacturer document using exactly this code was found; the description rests on CARB's requirement to monitor evaporative system components and these component sources.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number1 / 7F

Possible causes

  • Leak detection pump filter dirty or blocked high
  • Moisture or ice in filter or hose medium
  • Hose between filter and pump kinked or blocked medium
  • Pump module faulty (wrong reference) low

Symptoms

  • Check engine light on
  • EVAP readiness not set
  • Possibly refuelling difficulties (venting)
  • Usually no noticeable change in driving

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for P017F

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication