OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P017D

Cylinder Head Temperature Sensor A Circuit High

The cylinder head temperature sensor A is an NTC thermistor that measures the temperature of the cylinder head metal or of the coolant in the head. Some Ford engines use it instead of a coolant temperature sensor and calculate a coolant value from it; VW group V8 petrol engines use it as sender G407. CARB requires such sensors to be monitored like the coolant sensor. P017D means the signal voltage is too high – the sensor or wire is open or shorted to voltage, and the control module would read an implausibly cold head. Ford's published summaries flag this under its own code P1289 above 4.96 V for 5 s, but a 2019 bulletin for the F-150 and Mustang 5.0 litre names P1289 and/or P017D and replaces the sensor – so at least that calibration also sets the generic code. GM lists P017D only as an exclusion condition in its diesel software. The engine uses substitute values; the radiator fan typically runs constantly.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number1 / 7D

Possible causes

  • Sensor faulty (series fault on Ford 5.0 litre 2019) high
  • Connector unplugged or corroded, wire open high
  • Signal wire shorted to voltage low
  • Engine control module low

Symptoms

  • Check engine light on
  • Temperature gauge cold or missing
  • Radiator fan runs constantly
  • Cold-start or idle problems possible

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P017D

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication