OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P017B

Cylinder Head Temperature Sensor A Range/Performance

The cylinder head temperature sensor A is an NTC thermistor that measures the temperature of the cylinder head metal or of the coolant in the head. Some Ford engines use it instead of a coolant temperature sensor and calculate a coolant value from it; VW group V8 petrol engines use it as sender G407. CARB requires such sensors to be monitored like the coolant sensor. P017B means the signal is electrically valid but implausible – for example it does not fit other temperature sensors after a long standstill or does not rise as expected. Audi documents it on 2019–2021 V8 TFSI models and Bentley on V8 models from 2018 onwards, together with a cooling system fault code and a red coolant warning: a damaged O-ring at the sensor tip lets water into the housing and damages the sensing element, often intermittently; the fix is a new sender. GM lists P017B only as an exclusion condition in its diesel software. Thresholds are not public.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number1 / 7B

Possible causes

  • Sensor damaged by moisture (O-ring) high
  • Genuine temperature problem (air in cooling system, thermostat) medium
  • Contact resistance at the connector medium
  • Software or calibration low

Symptoms

  • Check engine light on
  • Red coolant warning or overheating warning
  • Radiator fan runs loud or constantly
  • Possibly reduced power

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P017B

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication