OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P017A

Cylinder Head Temperature Sensor A Circuit

The cylinder head temperature sensor A is an NTC thermistor that measures the temperature of the cylinder head metal or of the coolant in the head. Some Ford engines use it instead of a coolant temperature sensor and calculate a coolant value from it; VW group V8 petrol engines use it as sender G407. CARB requires such sensors to be monitored like the coolant sensor. P017A is the general circuit fault without telling low from high. No manufacturer document using exactly this code was found: VW uses P017B/P017C/P017E for its sensor, and Ford's summaries list its own codes. Ford's published summaries still use its own codes P1289/P1290 for this sensor (fault below 0.244 V or above 4.96 V for 5 s). The description rests on CARB and component information. On a sensor fault the control module typically uses a modelled temperature and runs the radiator fan.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number1 / 7A

Possible causes

  • Wiring or connector open or corroded high
  • Sensor faulty (moisture in the housing) medium
  • Engine control module low

Symptoms

  • Check engine light on
  • Coolant temperature warning or wrong gauge reading
  • Radiator fan runs loud or constantly
  • Cold-start problems possible

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P017A

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication