OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0173

Fuel Trim Bank 2

With closed-loop control the engine module corrects the injected fuel using the oxygen sensor: short-term fuel trim reacts within fractions of a second, long-term trim stores a learned base correction per load and speed range. Positive values mean fuel is being added because the mixture was lean, negative values mean fuel is being removed; around ±10 % is normal. P0173 is the bank 2 counterpart of P0170: a direction-neutral trim fault, so whether bank 2 runs lean or rich has to be read from the trim values. It is mainly used by Mercedes-Benz V6 and V8 petrol engines instead of P0174/P0175; their workshop magazine names the air flow sensor as the most frequent fix. P0170 and P0173 together point to a common cause. No manufacturer threshold was found; the description rests on CARB's fuel system monitoring requirement and that publication. Two trips.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number1 / 73

Possible causes

  • Air flow sensor dirty or faulty high
  • Air leak on bank 2 or at the crankcase ventilation medium
  • Fuel pressure or bank 2 injectors medium
  • Exhaust leak ahead of the bank 2 oxygen sensor low

Symptoms

  • Check engine light on (after two drive cycles)
  • Rough idle
  • Higher consumption
  • Often no symptoms

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P0173

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication