OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0149

Fuel Timing Error

P0149 is a diesel code for a deviation of the actual from the target start of injection. On distributor pumps such as the Bosch VP44, a timing device sets the delivery start, and the pump control unit compares the actual position with the target. On the 2003 Saab 9-3 2.2 TiD (GM/Opel engine) P0149 means injection too early – too late is the manufacturer code P1149; it is monitored continuously above 600 rpm and leads to limp mode with limited fuel quantity. CARB has required injection timing monitoring for all diesels since model year 2010. On common-rail systems timing is mostly covered by injector-related codes, so P0149 is rare there.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number1 / 49

Possible causes

  • Injection pump wrongly set or drive (belt, key) shifted high
  • Timing device or timing solenoid of the pump faulty medium
  • Air in the fuel or low supply pressure medium
  • Pump control unit faulty low
  • Crankshaft or camshaft signal disturbed low

Symptoms

  • Check engine light on
  • Limp mode with power limitation
  • Starting problems up to no start
  • Smoke, knocking, rough running

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P0149

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication