P013F
O2 Sensor Delayed Response - Lean to Rich Bank 1 Sensor 2
The downstream oxygen sensor (sensor 2, after the catalytic converter) is used for fine mixture trim and to monitor the converter. 'Delayed response' means the sensor starts reacting too late, or does not reach the target level at all, after the mixture has changed. This code covers the lean-to-rich direction, tested when fuel returns or the control module briefly enriches the mixture. GM checks whether the signal rises above 350 mV before about 75 g of air have passed after the forced change; failing needs two trips. GM investigated this code together with its siblings on 2023–2024 Corvettes with non-original converters or exhaust parts. CARB requires separate detection of slow and delayed faults in each direction (phased in from 2009 for downstream and 2011 for upstream sensors).
Possible causes
- Downstream oxygen sensor aged or contaminated (soot, oil, silicone, coolant) high
- Exhaust leak between manifold/turbo and the sensor medium
- Converter faulty or non-original with different oxygen storage medium
- Control module software too sensitive (update available) low
- Sensor connector or wiring with contact resistance low
Symptoms
- Check engine light on
- Usually no noticeable change in driving
- Catalyst monitor may stay incomplete (inspection readiness missing)
- With a converter cause, P0420/P0430 may follow
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P013F
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.