OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P012A

Turbocharger/Supercharger Inlet Pressure Sensor A Circuit

The turbocharger/supercharger inlet pressure sensor A sits between the air filter and the compressor. The engine uses it for the compressor pressure ratio, to judge air filter restriction (ambient minus inlet pressure) and to cross-check the other pressure sensors. P012A is the general circuit fault. Ford's 2023 diesels use a digital SENT sensor here and set P012A when its error flag is raised or the value exceeds a limit for 5 s; lost communication is reported separately (U068B). FCA's 2019 Jeep Wrangler 2.0 turbo could set P012A, P012C and P012D falsely and was fixed with new engine software, so the software level is worth checking before replacing parts. GM's supercharged V8 uses only P012B–P012D. A substitute value, usually ambient pressure, is used.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number1 / 2A

Possible causes

  • Connector or wiring open, corroded or shorted high
  • Sensor faulty (SENT sensor reports internal error) medium
  • Control module software (false setting) medium
  • Engine control module faulty low

Symptoms

  • Check engine light on
  • Often no noticeable symptoms
  • Power limitation possible

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for P012A

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication