P011F
Engine Coolant Temperature 2 / Ambient Air Temperature Correlation
This is the counterpart of P011E for the second coolant temperature sensor and only exists on engines that have one – for example at the engine outlet, the radiator or in the heater circuit. After a long standstill sensor 2 should also read roughly the outside temperature; if it disagrees with the ambient sensor beyond a calibrated limit at start-up, P011F is set without saying which sensor is wrong. No manufacturer document using exactly this code was found; the description rests on CARB plus the cold-soak comparisons documented by Mazda (sensor 2 in the heater hose) and Ford under other codes.
Possible causes
- Coolant temperature sensor 2 drifting medium
- Ambient temperature sensor faulty or influenced medium
- Preheater or block heater medium
- Contact resistance at sensor 2 low
Symptoms
- Check engine light on
- Usually no driving symptoms
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P011F
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.