P011E
Engine Coolant Temperature 1 / Ambient Air Temperature Correlation
After a long standstill, typically six to eight hours, the coolant should have cooled to roughly the outside air temperature measured by the ambient sensor in the bumper or mirror. P011E compares coolant temperature sensor 1 with the ambient sensor at start-up and is set when they differ beyond a calibrated limit and no preheater was detected. The code does not say which of the two sensors is wrong. No manufacturer document using exactly this code was found; the description rests on the CARB requirement for coolant sensor plausibility and on the same cold-soak comparison that Ford (reported as P0071), GM/Saab and Mazda perform under other codes.
Possible causes
- Coolant temperature sensor 1 drifting medium
- Ambient temperature sensor drifting or affected by engine heat or sun medium
- Preheater not detected medium
- Contact resistance in one sensor's connector or wiring low
Symptoms
- Check engine light on
- Usually no driving symptoms
- Outside temperature display possibly wrong
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P011E
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.
Sources
- law.cornell.edu/regulations/california/13-CCR-1968.2
- static.nhtsa.gov/odi/tsbs/2019/MC-10168072-0001.pdf
- fordservicecontent.com/Ford_Content/catalog/motorcraft/OBD-Operations-Summary-Gasoline-2020-2023.pdf
- saabwisonline.com/9-5-9650/2011/2-engine/engine-management-and-fuel-system-2-0-l-petrol/fault-diagnosis-diagnostic-trouble-codes/dtc-p0128